engineering export bulletin engineering the future
  • Mr. R Seshagiri Dy. Regional Chairman, EEPC India (SRO), Bengaluru, Welcoming the gathering at the Session on GST in Exports held on 17th December, 2019 in Bengaluru
  • Mr. D P Nagendra Kumar, IRS, Principal Chief Commissioner of Central Tax, Bengaluru, delivering the Keynote Address at the Session on GST in Exports held on 17th December, 2019 in Bengaluru
  • EEPC India (NR) held a meeting of new Members in New Delhi on 24th December, 2019. Mr. Gavinder Malhotra, Sr. Assistant Director, EEPC India addressed the member exporters
  • Mr. Pradeep Kr Aggarwal, Dy. Regional Chairman (NR), EEPC India (on the head table - Middle) is interacting with the Panel Members at the meeting. To his right Mr. Rakesh Suraj, Regional Director (NR) EEPC India is seen at the 4th Bicycle Parts and similar products Panel Meeting held on 23rd December, 2019 in Ludhiana, Punjab
  • Mr. Amitesh B Singh, IRS, Additional Director General of Taxpayer Services, DGTS BZU, Bengaluru, making a presentation on GST in Exports held on 17th December, 2019 in Bengaluru
  • Session on GST in Exports held on 17th December, 2019 in Bengaluru. Mr. C H Nadiger, Regional Director, EEPC India (SR), making a presentation of IESS IX

ENGINEERING EXPORT INFO-BULLETIN | VOL. 22 | ISSUE NO. 04 | JANUARY 27, 2020

eepc mobile app

Contents

From Chairman’s Pen

OVERSEAS SECTION

Global Business Opportunities

DOMESTIC SECTION

For information about
EEPC INDIA visit :
www.eepcindia.org

Highlights

Govt. Notifications/ Circulars

  • Circular No.131/1/2020-GST - Standard Operating Procedure (SOP) to be followed by exporters– regarding.
  • Circular No. 05/2020-Customs - Implementation of automated clearance on pilot basis–reg.
  • A.P. (DIR Series) Circular No. 20 - Merchanting Trade Transactions (MTT) – Revised Guidelines.
chairman

My dear fellow exporters,

Outbreak of Coronavirus in China has now become the most talked about as well as alarming global concern.If not eradicated in the very beginning, it will in all possibilities take the form of an epidemic. Not only the social life of people will be impacted, spread of this virus will also cause severe damage on global economic activities. As the largest Export Promotion Council under the aegis of Ministry of Commerce and Industry, Government of India catering to engineering sector, EEPC is really worried about the deadly impact of the virus on India’s trade with China and urged the government to comprehend the extent of damage that could be faced by the India’s exporting community as a consequence. Engineering is the largest foreign exchange earner for India among all sectors with an export share of around 25 percent in total merchandise export.

China of late has emerged as our 10thlargest export destination for engineering products, dominated by iron and steel and industrial machinery. Indian engineering exports to China increased by a significant 27.60 per cent to USD 1.77 billion during April-December 2019-20 from USD 1.33 billion a year ago. Iron and steel exports to China had shown an impressive year-on-year increase of over 121 per cent to USD 452 million during April-December this fiscal. Export of industrial machinery to China also surged by 12 per cent to USD 433 million during this period.

The engineering trade figure definitely shows that the tide is gradually turning in India’s favour. At this juncture, any disruption caused by externality must be treated with utmost urgency so that the current trend of improving exports does not get upset. The transport and travel restriction to some cities of China may bring down the volume of exports and hurt the existing pulse in turn. There is every need to ascertain the exact impact on trade and take appropriate combating measures at the earliest.

 

Ravi Sehgal 

Amidst India’s faltering merchandise export growth and prolonged contraction in export credit growth, exporters have at least seen some silver lining as both the domestic government and the monetary regulatory authority RBI have been in consultation to ease priority sector lending norms for exports in order to ensure higher flow of credit towards export sector, according to news source. The Commerce and Industry minister has very recently held a meeting with senior public-sector bankers to push for easier and higher flow of credit disbursalfor exporters at cheaper rates. The government is expected to announce a slew of measures to boost export growth very soon while the RBI is also likely to change credit norms in favour of the exporters.

 

The measures to reinvigorate export credit has been the demand of the exporters as many MSME exporters have already been forced to go out of business due to excessive financial crunch and many are facing the same threat. To ensure availability of hassle-free credit to small exporters is a priority for the commerce minister.According to the latest RBI data, export credit of scheduled banks shrank as much as 36.1% year-on-year as of June 21, even on a low base of 42.7% contraction a year earlier.

 

The interest subvention provided to the exporters to the extent of three to five percent on bank credit has to make way for suitable alternative as WTO has raised objection to this kind of schemes on the ground of non-compliance. An alternative mechanism to facilitate export credit is desperately required. EEPC India has already suggested refund of embedded taxes for the exporters.

 

EEPC India, as a premiere trade and investment promotion body under the Ministry of Commerce and Industry, wholeheartedly thank the government for its initiative to revive exports from India.

Overseas Information

OVERSEAS MARKET INFORMATION

Australia
(Source : Consulate General of India, Sydney)

During Jan-Oct 2019, Australia exported merchandise goods to India worth USD 8.36 billion, while importing goods worth USD 2.78 billion from India. The total merchandise trade between India and Australia decreased 15.2 percent I.e. from USD 13.1 billion to USD 11.1 billion between Jan-Oct 2018 and Jan-Oct 2019. Indian merchandise exports to Australia for the period witnessed a decrease of 16 percent compared to the same period in 2018. During Jan-Oct 2019 Australia’s export to India declined by 15 percent.

During the reporting period, the top 10 commodities of export from India to Australia included Medicaments, Refined petroleum oils, Railway vehicles, Pearls & precious stones, Jewellery, Made up articles of textile materials, Women or girls clothing, Articles of apparels & textile fabrics, Floor coverings, and Manufactures of base metal.

Medicaments and Refined petroleum oils were the top two Indian exports to Australia with Made in India Railway Coaches featuring as 3rd largest export item from India to Australia during Jan-Oct 2019. More than US$ 222 million worth of Indian made railway vehicles were exported. It may be mentioned that New South Wales Government ordered 22 driverless metro trains of 6 coaches each built by Alstom in Sri City, India. The metro coaches, built for the Australian government, was the first of its kind India has ever exported. The new train is capable of being operated automatically through the Automatic Train Protection and Automatic Train Operation (ATP/ATO) modes with the help of Alstom’s Urbalis 400 communications-based train control (CBTC) signalling solution.

Export of ‘Coal’ from Australia to India was the main contributor for the volume of bilateral trade between the countries during the reporting period, with a value of USD 6.28 billion, amounting to 75 % of Australia’s total exports to India. 

Switzerland
(Source : Embassy of India, Berne)

Potential products of imports from India

Commodity - Medium oils and preparations, of petroleum or bituminous minerals, n.e.s. containing by weight => 70% of petroleum, these oils being the basic constituents of the preparations (excl. light oils and preparation).

Rationale - Comparison between India’s exports to the world, India’s export to Switzerland and Switzerland’s imports from the world at 6digit HS Code in November 2019.

Commodity - Motor cars and other motor vehicles principally designed for the transport of persons, incl. station wagons and racing cars, with spark-ignition internal combustion reciprocating piston engine of a cylinder capacity > 1.500 cm3 but <= 3.000 cm3 (excl. bus of heading 8702 and special motor vehicles of heading 8703.10).

Rationale - Comparison between India’s exports to the world, India’s export to Switzerland and Switzerland’s imports from the world at 6 digit HS Code in November 2019.

Commodity - Energy/ Renewable

Rationale - Switzerland is expanding its green energy basket, thus providing complementarity with India’s trade and investment basket in this sector.

Trade in Goods - The total export products to Switzerland from India registered a decrease of -14.69% (USD Million 180) in November 2019, as compared to October 2019 (211 USD million).

The increase in exports in November 2019 was particularly seen in the field - Gold, incl. gold plated with platinum, unwrought, for non-monetary purposes (excl. gold in powder form) [included in the special trade since 1.1.2012]; - Coffee (excl. roasted and decaffeinated) [HS Code 0901.11]; Amino-acids and their esters; salts thereof (excl. those with > one kind of oxygen function, lysine and its esters, and salts thereof, and glutamic acid, anthranilic acid, tilidine "INN", and salts thereof) [HS Code 2922.49 ]; and Apparatus based on the use of X-rays, for medical, surgical or veterinary uses (excl. for dental purposes and computer tomography apparatus) [HS Code 9022.14] The total import from Switzerland to India registered an increase of 22.95% (USD 1559 Million) in November 2019, as compared to October 2019 (USD 1268 million).

The increase in imports was particularly seen in the field of Gold, incl. gold plated with platinum, unwrought, for non-monetary purposes (excl. gold in powder form) [included in the special trade since 1.1.2012] [HS Code 7108.12]; Wrist-watches, whether or not incorporating a stop-watch facility, with automatic winding (excl. of precious metal or of metal clad with precious metal) [HS Code 9102.21]; and 8419.89 - Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, sterilising, pasteurising,

steaming, evaporating, vaporising, condensing or cooling (excl. Medical, surgical or laboratory sterilizers) [HS Code 8419.89]

Analysis - Both Export and Imports between India and Switzerland have been rising with India’s trade with Switzerland from January-November 2019 accounted for 3.47% of Switzerland’s total trade.

Trade in Services - The Service-related data is available on the Swiss side only on quarterly basis. In comparison to the 1st quarter of 2019, in the 2nd quarter of 2019, the Services exports from India to Switzerland saw increase in Tourism sector (28.8%) followed by Consulting Services (19.5%).

The Services imports from Switzerland saw increase in: Tourism (61.8); Insurance & Pension Services (55.6%); Financial Services (21%); Technical, trade-related, and other business services (20.1%). Overall the Services trade was in favour of India.

Analysis - Overall the trade in Services is in favor of India. License Fees [IPR related] expectedly is in favour of Switzerland.

Investment - As per DIPP, the FDI from Switzerland to India from April 2000 to June 2019 stood at USD 4674.07 million, making 1.07% of the total FDI Equity inflow. As per RBI figures, the total ODI from India to Switzerland during November 2019 was USD 204.45 million compared to USD 74.09 million in October 2019.

Analysis - The investments from India to Switzerland are largely in field of Manufacturing, Financial, Insurance, and Business services, and Wholesale, Retail Trade, Restaurants, and Hotel.

Momentum in India - Swiss SME’s Program (MISSP 2.0) Workshop at St. Gallen; 02.12.2019

The Mission organised a Momentum in India – Swiss SME’s Program (MISSP 2.0) Workshop in St. Gallen on 02.12.2019. The Workshop focused on Industry 4.0, AI and Robotics sectors. The Workshop received an overwhelming response from invited guests and experts.

MOMENTUM IN INDIA: Glimpses of ‘Market Focus: India’ business event, Geneva; 04.12.2019

Chamber of Commerce, Industry and Services. Ambassador Sibi George delivered keynote address with presentations and panel discussion on opportunities in India by industry experts.

India Business Information Center in Zurich

The Embassy of India, Berne, organised an India Business Information Center in Zurich, which focused on promoting and disseminating information regarding business opportunities in India among Swiss companies and entrepreneurs. India Business Information Center in Zurich, also facilitates the MISSP (Momentum in India: Swiss SMEs Program), which the Mission is currently executing.

India – Switzerland Joint Economic Commission

Action Point - Operational follows-ups of the meeting (annexure –IV of the Joint Minutes), a non-paper on ‘Establishing Corporation to CoDevelop & Co-Create for the global market, leveraging respective strengths in the Internet of Things, Space & Engineering R&D Space’.

Action taken - On 08 October 18, Shri Gagan Sabharwal, Senior Director, NASSCOM visited Switzerland and had meetings with SECO, SICC and Swissmem and IT companies on theme `Co-Create and CoDevelop for Global Markets.

TENDER INFORMATION

Mongolia Mongolia
(EEPC Ref. No. DB-2405)
Project            

Fourth Health Sector Development Project
Loan No. : 0236-MON
Financing from ADB            

DB Ref. No.  ADB-P456908-01/20 
Issued by 

Ministry of Health of Mongolia
Olympic Street 2, Extension building of Government Building 8
3rd Floor, Room No. 4
Zip Code : 210648
Ulaanbaatar 48, Mongolia
Attn. : Mrs. Bayartogtokh Jugdersuren, procurement officer
Tel. : 976-11-317920
Fax :   976-11-329369
E-mail : Bayartogtokh.jugdersuren@hsdp.org 

Bid No.  G03 
For 

Supply, delivery and installation of Medical and diagnostic equipment for Songinokhairkhan District General Hospital,
Ulaanbaatar City in Mongolia. These include treatment, nursing, organic-functional support, clinical physiology,
diagnostic imaging, clinical laboratory and operating room and anesthesia equipment.

The package has five (5) Lots :
- Lot 1 : Treatment, nursing, organic-functional Support
- Lot 2 : Clinical Physiology
- Lot 3 : Diagnostic Imaging
- Lot 4 : Clinical Laboratory
- Lot 5 :  Operating, anesthesia 

Tender cost 

Non-refundable fee of US$100.00 by direct deposit into the following account:

Bank Name: State Bank of Mongolia, Branch No. 100
Bank Address: Choimbol-6, Ulaanbaatar, Mongolia
Account Name: Fourth Health Sector Development Project
Payee`s Account No. : 240026067406
SWIFT Code: STBMMNUB

Correspondent Bank :
Bank Name: KOOKMIN BANK
SWIFT Code: CZNBKRSE 

The document will be sent by airmail or courier services for overseas delivery and surface mail or courier for local delivery.
In case of delivery of the Bidding Document, the fee for such service shall be payable by the bidder who purchases the
Bidding Document. No liability will be accepted for loss or late delivery. 

Bid deadline  05.03.2020 
Nepal Nepal
(EEPC Ref. No. DB-2406)
Project               

SASEC Power Transmission and Distribution System Strengthening Project
Loan No. : 50059-NEP
Financing from ADB                

DB Ref. No.  ADB-P456314-01/20 
Issued by 

SASEC Power Transmission and Distribution System Strengthening Project
Electric Vehicle Charging Infrastructure Development Project
Project Management Directorate
Nepal Electricity Authority
Durbarmarg, Kathmandu, Nepal
Attn. : Sagar Mani Gnawali, Project Manager
Tel. : +977-1-4153301, 4153247
E-mail : nea.eelrd@gmail.com; sagar@nea.org.np 

Bid No.  PMD/PTDSSP/EVCS/2076/77-01 
For  Supply, Delivery, Installation, Testing, Commissioning and Operation/Maintenance of Electric Vehicle Charging Stations. 
Tender cost  Non-refundable fee of NRs. 20,000.00 (incl. VAT) or an equivalent amount in US$ by bank voucher to the Account No.
0010002287300001 (NEA Central Payment Division) at Kumari Bank Limited, Putalisadak, Kathmandu, Nepal. 
Bid deadline  06.03.2020 
Source  UN Development Business Website 
Kuwait Kuwait
(EEPC Ref. No. MEED-2836)
Tender No.                 PA/SH.AM/83/2018/2019               
Tender for  Chiller plant services 
Tender details  Provision of engineering services for a chiller plant at a higher institute for communications & navigation. 
Bid bond  KD 6,000 
Cost of tender documents  KD 300 
Closing date  24.03.2020 
Issued by 

Central Tenders Committee
Public Authority for Applied Education & Training
P. O. Box 1070
Safat 13011, Kuwait
Tel. : (965) 2401200
Fax: (965) 2416574
E-mail: info@ctc.gov.kw
Website : www.ctc.gov.kw;
www.capt.gov.kw 

Kuwait Kuwait
(EEPC Ref. No. MEED-2837)
Tender No.               MI/308/2019/2020              
Tender for  Air-conditioning equipment 
Tender details  Supply, installation and guarantee of air-conditioning equipment. 
Bid bond  KD 3,500 
Cost of tender documents  KD 150 
Closing date  19.04.2020 
Issued by 

Central Tenders Committee
Information Ministry
P. O. Box 1070
Safat 13011, Kuwait
Tel. : (965) 2401200
Fax: (965) 2416574
E-mail: info@ctc.gov.kw
Website : www.ctc.gov.kw;
www.capt.gov.kw 

Kuwait Kuwait
(EEPC Ref. No. MEED-2838)
Tender No.                 MEW/64/2018/2019                
Tender for  Cable works 
Tender details  Repair of low-tension ground cables and extension and welding of low-tension cables for new
consumers at Jahra governorate. 
Bid bond  KD 45,000 
Cost of tender documents  KD 1,000 
Closing date  01.03.2020 
Issued by 

Central Tenders Committee
Electricity & Water Ministry
P. O. Box 1070
Safat 13011, Kuwait
Tel. : (965) 2401200
Fax: (965) 2416574
E-mail: info@ctc.gov.kw
Website : www.ctc.gov.kw;
www.capt.gov.kw 

Kuwait Kuwait
(EEPC Ref. No. MEED-2839)
Tender No.             MEW/7290/2019            
Tender for  Power cables 
Tender details  Supply of 11kV medium-tension aluminium cables, 11kV medium-tension cables, pilot cables,
800-millimetre power cables and 630-millimetre low-tension cables. 
Bid bond  KD 45,000 
Cost of tender documents  KD 1,000 
Closing date  19.04.2020 
Issued by 

Central Tenders Committee
Electricity & Water Ministry
P. O. Box 1070
Safat 13011, Kuwait
Tel. : (965) 2401200
Fax: (965) 2416574
E-mail: info@ctc.gov.kw
Website : www.ctc.gov.kw;
www.capt.gov.kw 

Kuwait Kuwait
(EEPC Ref. No. MEED-2840)
Tender No.                MEW/52/2018/2019                
Tender for  Power transformer cooling fans 
Tender details  Supply, installation and replacement of cooling fans for power transformers at various
main transformer stations, phase 2. 
Bid bond  KD 23,000 
Cost of tender documents  KD 1,000 
Closing date  18.02.2020 
Issued by  Central Tenders Committee
Electricity & Water Ministry
P. O. Box 1070
Safat 13011, Kuwait
Tel. : (965) 2401200
Fax: (965) 2416574
E-mail: info@ctc.gov.kw
Website : www.ctc.gov.kw;
www.capt.gov.kw
 
Kuwait Kuwait
(EEPC Ref. No. MEED-2841)
Tender No.              CA/CPC/0413             
Tender for  Substation battery chargers 
Tender details  Replacement of old and obsolete 110V DC battery chargers at the M20A substation and
RM28 substation at the Mina al-Ahmadi refinery. 
Bid bond  KD 1,000 
Closing date  16.04.2020 
Issued by 

Kuwait National Petroleum Company
P. O. Box 70
Ahmadi 13001, Kuwait
Tel. : (965) 23887794/23887792/23207793
E-mail: cwphelp@knpc.com.kw
Website: http://esourcing.knpc.com 

Kuwait Kuwait
(EEPC Ref. No. MEED-2842)
Tender No.                1029823            
Tender for  Air blower parts 
Tender details  Supply of spare parts for an air blower for unit no. 29. 
Bid bond  KD 1,000 
Closing date  13.02.2020 
Issued by 

Kuwait National Petroleum Company
Commercial Department
P. O. Box 70
Ahmadi 13001, Kuwait
Tel. : (965) 23887794/23887792/23207793
E-mail : cwphelp@knpc.com.kw
Website: http://esourcing.knpc.com 

Kuwait Kuwait
(EEPC Ref. No. MEED-2843)
Tender No.              RFQ-1029890               
Tender for  Compressor parts 
Tender details  Supply of spare parts for compressors. 
Bid bond  KD 1,000 
Closing date  13.02.2020 
Issued by  Kuwait National Petroleum Company
Commercial Department
P. O. Box 70
Ahmadi 13001, Kuwait
Tel. : (965) 23887794/23887792/23207793
E-mail : cwphelp@knpc.com.kw
Website: http://esourcing.knpc.com
 
Kuwait Kuwait
(EEPC Ref. No. MEED-2844)
Tender No.               RFQ-1029120           
Tender for  Steam boiler parts 
Tender details  Supply of spare parts for utility steam boilers (CFP-MAB, MFR MACCHI). 
Bid bond  KD 5,000 
Closing date  09.04.2020 
Issued by  Kuwait National Petroleum Company
Commercial Department
P. O. Box 70
Ahmadi 13001, Kuwait
Tel. : (965) 23887794/23887792/23207793
E-mail : cwphelp@knpc.com.kw
Website: http://esourcing.knpc.com 
 
Kuwait Kuwait
(EEPC Ref. No. MEED-2845)
Tender No.               RFQ-1028646              
Tender for  Steam engine parts 
Tender details  Supply of spare parts for steam engines. 
Bid bond  KD 1,000 
Closing date  13.02.2020 
Issued by  Kuwait National Petroleum Company
Commercial Department
P. O. Box 70
Ahmadi 13001, Kuwait
Tel. : (965) 23887794/23887792/23207793
E-mail : cwphelp@knpc.com.kw
Website: http://esourcing.knpc.com
 
United Arab Emirates United Arab Emirates
(EEPC Ref. No. MEED-2846)
Tender No.              RFX-2132000021              
Tender for  Water reservoir 
Tender details  Construction of a 30MIG water reservoir in Hatta. 
Bid bond  5 per cent of tender price 
Cost of tender documents  AED 2,100 
Closing date  05.03.2020 
Issued by 

Dubai Electricity & Water Authority
Office of the Contracts Manager
Zabeel East, P. O. Box 564
Dubai, UAE
Tel. : (9714) 3244444
Fax: (9714) 3248111
E-mail: contracts@dewa.gov.ae
Website : www.dewa.gov.ae;
https://srm.dewa.gov.ae 

United Arab Emirates United Arab Emirates
(EEPC Ref. No. MEED-2847)
Tender No.                RFX-2121900212            
Tender for  Power cables 
Tender details  Installation of 33kV power cables and carrying out related works for a proposed 33/11kV substation in Marmoom. 
Bid bond  5 per cent of tender price 
Cost of tender documents  AED 1,050 
Closing date  19.02.2020 
Issued by 

Dubai Electricity & Water Authority
Office of the Contracts Manager
Zabeel East, P. O. Box 564
Dubai, UAE
Tel. : (9714) 3244444
Fax: (9714) 3248111
E-mail: contracts@dewa.gov.ae
Website : www.dewa.gov.ae;
https://srm.dewa.gov.ae 

Source  MEED.com website 

Domestic Information

PUBLIC NOTICE

Dated 23 January, 2020

Circular No. 131/1/2020 - GST



Ministry of Finance, Department of Revenue, Central Board of Indirect Taxes and Customs, Government of India, New Delhi has issued a Circular No. 131/1/2020-GST, dated 23rd January, 2020 regarding Standard Operating Procedure (SOP) to be followed by exporters. The above GST Circular has already been hosted in our Website (http://www.eepcindia.org/download/200127131007.pdf) for information of our Members.
Dated 27 January, 2020

Circular No. 05/2020-Customs



Ministry of Finance, Department of Revenue, Central Board of Indirect Taxes and Customs, Government of India, New Delhi has issued a Circular No. 05/2020-Customs, dated 27th January, 2020 regarding Implementation of automated clearance on pilot basis. The above Customs Circular has already been hosted in our Website (http://www.eepcindia.org/download/200128142940.pdf) for information of our Members.

EXPORT FINANCE

Dated 23 January, 2020

RBI/2019-20/152
A.P. (DIR Series) Circular No. 20




The Reserve Bank of India, Mumbai has issued A.P. (DIR Series) Circular No. 20, dated 23rd January, 2020 regarding Merchanting Trade Transactions (MTT) – Revised Guidelines. The above Circular has already been hosted in our Website (http://www.eepcindia.org/download/200127131058.PDF) for information of our Members.

STEEL PRICES

Steel Market Current Report

Mandi Gobindgarh
Open Market Rates of Rerollables (January 25, 2020)

(Exclusive of GST) (Trade Terms 1% Cash Discount) (Rate Rs. per Tonne)
Ingot
Arc/Ind. Furnace
Round quality (21x25) 31,600
Structural quality (28x30) 31,600
Low carbon (12x16) -
Semi low carbon (18x21) 31,550
5x6 Girder quality (25x30) -
Runners/Risers 31,650
Bones/Clean -
Billets & Squares  
50x50x63x63x65x65 mm MS -
75x75x80x80x90x90 mm MS 31,800
100x100 mm MS 31,800
125x125 mm MS/ Concast -
100x100 mm Concast-Billets 31,800
100x100 Concast-SAIL DSP 31,800
H.C. Billet SAIL 150x150 mm) -
H.C. Billet-Tisco 75x75 mm) -
Blooms  
Above 251 mm Bloom (HC) 28,300
Above 251 mm Bloom (MS) 28,300
(DSP) Bloom 160x250 mm 28,300
130/135/140 mm (Tisco) MS -
150x150 mm Concast (DSP) 31,300
150x150 mm MS (SAIL) 31,300
Bloom Cut into pcs. (MS) 32,300
Bloom Cut into pcs. (Medium) 31,500
Bloom Cut into (Patra Pass) 31,500

Slabs  
Durgapur Slabs 14"x3" -
Durgapur Slabs -
Bokaro Slab Heavy -
Tata Concast Slab (Heavy) -
Skelp Tisco -
Rails  
Untested Rail - 75 lbs. 26,300
Untested Rail - 90 lbs. 26,300
Untested Rail - 105 lbs. 26,200
Rej. Wheel (Small) 26,200
Cut Tyre (Big) 33,100
Cut Tyre (Small) 27,100
Melting Scrap (F.O.R.)  
Fresh Scrap (Rolling Mill End)  26,700
Old Scrap (Godown) 22,900
Turning 21,900
Tin Tapper 24,300
Mill Scale 19,400
Sponge Iron 22,300
Pig Iron (F.O.R.)  
Foundry Grade 31,300
Steel Grade 24,100
C.I. Turning 17,100
Degi Scrap 24,400
Deg Casting 37,000
Ingot Moulds (Old) 23,500
Ingot Moulds (New) 35,600
Cut Ingot Moulds 22,400
Open Market Rates of Finished Goods (January 25, 2020)
(Inclusive of GST)
       (Rate per Qntl.)       

M. S. Rounds 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 16/20 mm 22/25 mm
Mild 4360 4380 4380 4390 4350 4450 4530 4390
Zindi Pass (Drawing) - - - 4380 4450 4450 4550 4550

                  Above rates of 6 mm rounds are of length up to 14’ Above 18’ = 4420

Heavy Rounds 28 to 53 mm 63 to 100 mm 110 to 125 mm 140 to 150 mm 165 mm 180 mm 200 mm
Mild    4480 4480  4530     4530 4540 4550 4430
M. S. Squares 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 16/20 mm 22/25 mm
Mild 4580
4580
4550
4610
4610
4610
4550
4540
M. S. Angles 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 75 mm 100 mm 110 mm 150 mm 200  mm
3 mm 4400 4360 4410 4480 4480 4550 - - - - -
5 mm 4250 4360 4480 4480 4550 4580
4480 - - -
6 mm 4440 4440 4480 4480 4550 4580 4570 - - -
8 mm - - 4450 4550 4550 4570 4570 - - -
10 mm - - 4450 4550 4550 4570 4630 4570 - -
12 mm - - 4450 4550 4230 4550 4560 - 4650

-

16 mm - - 4450 4550 4560 4550 4630 - - -
M. S. Flats 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 75 mm 100 mm
3 mm 4360 4350 4360 4390 4490 4450 - -
5 mm 4360 4350 4360 4360 4590 4650 4590 4590
6 mm 4390 4420 4360 4360 4510 4640 4590 4590
8 mm 4240 4360 4460 4600 4570 4590
10 mm - - 4230 4360 4460 4600 4570 4570
12/25 mm - - 4230 4360 4460 4600 4570 4570
18/19 Gauge 4210 4290 4440 4360
4460 4570 4570 4570

[Prices at other stockyards may vary]                                          Source : Steel Town (Weekly), January 25, 2020]

EEPC INDIA OFFICE BEARERS

CHAIRMAN SR. VICE CHAIRMAN  VICE CHAIRMAN

Ravi Sehgal 
Tel.: 91-33-2287-2256/8229/2290 
Fax : 91-33-2287-9938
E-mail : ravisehgal5@gmail.com

 

 

Mahesh K Desai
Tel.: 91-40-27617098/5131 (O)
91-40-27765793 (R)
Fax : 91-40-27614376
E-mail : desai.mahesh64@gmail.com
              hyd1_meera@bsnl.in

 

Arun Kumar Garodia
Tel.: 91-33-40052700
Fax : 91-33-40052800
E-mail : corona@coronaind.com
              arun@coronaind.com

 

REGIONAL CHAIRMEN / CHAIRPERSON

EASTERN REGION

B. D. Agarwal
Tel. : 91-33-22487249
Fax : 91-33-22481879
E-mail : bdacec@gmail.com

NORTHERN REGION
Kamna Raj Aggarwalla
Tel.: 91-181-2642001/02/03/04
Fax : 91-181-2642005
E-mail :         kamna.aggarwalla@gmail.com                          
SOUTHERN REGION

K. S. Mani 
Tel. : (91 491) 253-5669/9870
E-mail : atlasmachinetools1978@gmail.com

WESTERN REGION

Krishanlal Dhingra
Telefax : 91-22-2651-0038/2655-6955
E-mail : kldhingra@gmail.com

EEPC INDIA OFFICES

H.O. (Cell) REGISTERED & HEAD OFFICE

Suranjan Gupta 
Executive Director
EEPC INDIA
Vandhna (4th Floor)
11 Tolstoy Marg 
New Delhi 110 001
Tel.: 91-11-23353353, 23711124/25
Fax : 91-11-23310920
E-mail : eepcto@eepcindia.net
URL : www.eepcindia.org

Adhip Mitra
Addl. Executive Director & Secretary
EEPC INDIA
Vanijya Bhavan (1st Floor)
International Trade Facilitation Centre
1/1 Wood Street, Kolkata 700 016
Tel.: 91-33-22890651/52/53
Fax : 91-33-22890654
E-mail : eepcho@eepcindia.net
URL : www.eepcindia.org

REGIONAL OFFICES

EASTERN REGION
Anima Pandey
Regional Director & Director (Membership)
EEPC INDIA
Vanijya Bhavan (2nd Floor)
International Trade Facilitation Centre
1/1, Wood Street
Kolkata 700 016
Tel.: 91-33-22890673/74
Fax : 91-33-22890687
E-mail : eepcrokol@eepcindia.net
NORTHERN REGION
Rakesh Suraj
Regional Director
EEPC INDIA
Flat No.10
P, Q, N, 10th Floor
DCM Building
16 Barakhamba Road
New Delhi - 110 001
Tel.: 91-11-23314171/74
Fax : 91-11-23317795
E-mail : eepcrodel@eepcindia.net
SOUTHERN REGION
C. H. Nadiger
Regional Director
EEPC INDIA
Greams Dugar (3rd Floor)
149 Greams Road
Chennai 600 006
Tel.: 91-44-28295501, 28295502
Fax : 91-44-28290495
E-mail : eepcrochen@eepcindia.net
WESTERN REGION
Rajat Srivastava
Regional Director & Director (Marketing & Sales)
EEPC INDIA
B-202 & 220, Aurus Chambers
Annex "B", 2nd Floor Behind Mahindra Tower
S.S. Amrutwar Marg
Worli, Mumbai 400 013
Tel.: 91-22-4212 5555
Fax : 91-22-2495 5486
E-mail : eepcromum@eepcindia.net

SUB-REGIONAL OFFICE

AHMEDABAD
Sudhakaran C. K. Nair
Deputy Director
EEPC INDIA
TF-313/A(3rd Floor)
ATMA House, Ashram Road
Ahmedabad 380 009
Tel.: 91-79-26588720
E-mail : eepcsroahd@eepcindia.net
BANGALORE
J. V. Raja Gopal Rao
Sr. Deputy Director
EEPC INDIA
Embassy Square, 103, First Floor
No.148, Infantry Road
Bengaluru - 560 001
Tel.: 91-80-22261396/22268669
Fax : 91-80-22266914
E-mail : eepcsroblr@eepcindia.net
HYDERABAD
V. C. Ravish
Sr. Executive Officer
EEPC INDIA
`Soham Mansion` (1st Floor)
No. 5-4-187/3 & 4/4, M.G Road
Secunderabad 500 003
Tel.: 91-40-27536704
Fax : 91-40-27536705
E-mail : eepcsrohyd@eepcindia.net
JALANDHAR
Pranab Kumar Singh
Assistant Director

EEPC INDIA
Plot Comm. 1, Focal Point
Jalandhar 144 012
Tel.: 91-181-2602264
Fax : 91-181-2601124
E-mail : eepcsrojld@eepcindia.net

CIN : U51900WB1955NPL022644